I.Technical parameters I.Equipment configuration The experiment device is mainly by the water tank experiment tube kit PVC pipe valves and stainless steel platform, etc The experimental pipe: inner diameter 16 mm, length 1000 mm, transparent organic glass tube, facilitate students to observe the detail inside the glass tube and the phenomenon....

I.Technical parameters 1.Function environment: temperature 0-400C,relative humidity≤90%RH,Power supply 220V/50Hz,it can opearte continuously. 2.Storage tank volume:20L, PVC plate welding plate. 3. Flowmeter: rotameter flowmeter, fluid range: 60-600L/H. 4.Experiment tank with organic glass, with weighing device and epxeriment...

I.Technical parameters 1. Operating environment: temperature 0-40 degree, relative humidity: ≤90%RH, power supply: 220 v / 50 Hz,be able to continuous operation. 2. Piezometric tube: ф 8 x 600 mm, 6 eas. 3. Experimental container: ф 200 x 300 mm, organic glass, containers are: air inlet port, liquid inlet port, liquid outlet. 4. Pump...

I.Technical parameters 1.Power: single phase/220V, 50Hz(we can design as your requirement), power supply: 120W 2.Work condition: normal temperature. 3.Fluid: 4m³/h, top lift: 11m, pressure difference: ±500mm, accuracy:±5. 4.Weight: 40kg 5.Dimension:...

I.Technical parameters 1.Function environment: temperature 0-40 degree, relative humidity ≤90%RH, power 220V/50Hz, single phase, can be adjust continuously. 2.Use low noise no corroding environmental small water pump, top lift 35m,maximum fluid 2.5m3/h, power supply 370W. 3.Experiment sink dimension:2000×100×200mm, organic glass material....

I.Technical parameters 1.Water pump: maximum fluid 30L/min. Top lift 16m. Power 370W. Work voltage 220V. Rotary speed 2850r/min 2.Hole plate diameter: dO=8mm, stainless material. 3. Venturi tube throat diameter: dV=8mm, stainless material. 4.Metering sink volume: 15L, storage water tank volume: 20L. 5. Experiment all fluid—water design...

I.Technical parameters 1.Organic glass sink:>30L. 2.Organic glass observation tube:Φ20mm. 3.Metering water tank: volume >8L. 4.Indicate liquid is red ink or other colorful ink liquid. 5.Structure is stainless, structure is light and beautiful, the flow is easy, operation is easy. ...

I.Technical parameters 1.Experiment water tank is made of Organic glass, with steady pressure overflow port . 2.Water pump: work power: 90W. Top lift: 8m, rated fluid : 10L/min. 3. Bend pipe resistance: two point test pressure distance is 200mm. 4. Storage water tank is made of PVC plate. 5. Function environment: temperature 0-40 degree,...

I.Technical parameters 1.Rough tube section: stainless tube, tube diameter 25mm. Tube length 1.6m,internal with stainless screw ot industrial galvanized tube. 2.Smooth tube section: stainless smooth tube, tube diameter 25mm. Tube length 1.5m. 3. local resistance section: tube diameter: 25mm, test valve local resistance. 4.Water pump: fluid...

I.Technical parameters Length: 2.2 m - Width: 0,63 m - Height: 1.60 m Weight (dry) 100 kg II.Experiment purpose Demonstrate the non-uniform flow in open channel flow water jump, water surface curve and other hydraulic...